BH3DPRINTING BHC-0112 Single Cup Holder

( Brand: Bh3dprinting ), ( Manufacturer Part Number: BHC-0112 ), ( Part Type: Holder ), ( Surface Finish: Black Or Gray ), ( Country/region Of Manufacture: United States ), ( Material: Abs Plastic )

Review BH3DPRINTING 1st Generation Toyota Single Cup Holder fits 4RUNNER 1984–1989

The Bh3DPrinting Toyota 4Runner Single Cup Holder (BHC-0112) is a meticulously designed and crafted accessory specifically engineered for Toyota 4Runners manufactured between 1984 and 1989. This cup holder is not just a simple addition to your vehicle, but a testament to the blend of function and style that Bh3DPrinting is known for.

This single cup holder is 3D printed using high-quality PLA (Polylactic Acid) material, ensuring durability, strength, and resistance to heat and cold. The material is also eco-friendly, as it's derived from renewable resources like corn starch and sugarcane.

The design of the cup holder is both practical and aesthetically pleasing. Its contoured shape fits perfectly into the center console of your 4Runner, providing a secure hold for your drinks. The smooth, non-slip surface ensures that your cup stays in place even on rough terrain, and the hole at the bottom allows for easy drainage in case of spills.

The Bh3DPrinting Toyota 4Runner Single Cup Holder is easy to install. It requires no drilling or modification to your vehicle, making it a hassle-free addition to your 4Runner. The cup holder is also lightweight, adding no unnecessary weight to your vehicle.

In conclusion, the Bh3DPrinting Toyota 4Runner Single Cup Holder (BHC-0112) is more than just a cup holder. It's a stylish, functional, and eco-friendly accessory that enhances your driving experience, making your 4Runner a more comfortable and convenient place to be.

1. Compatibility: This cup holder is specifically designed for Toyota 4Runners from 1984 to 1989, ensuring a perfect fit.

2. Durability: Made from high-quality ABS plastic, the cup holder is sturdy and long-lasting.

3. Ease of Installation: The cup holder is easy to install, requiring no drilling or permanent modifications to your vehicle.

4. Aesthetic Appeal: The cup holder has a sleek design that blends well with the interior of your 4Runner.

1. Limited Functionality: As a single cup holder, it may not be as versatile as multi-cup holders.

2. May Not Fit Perfectly: While the cup holder is designed for specific models, there may be minor variations that could affect its fit.

3. Quality Concerns: Some customers have reported issues with the quality and durability of the product.

The BH3DPrinting Toyota 4Runner Single Cup Holder (BHC-0112) is a convenient addition to your 4Runner, providing a secure place to store your drink. Its compatibility, durability, and ease of installation are significant advantages. However, the limited functionality and potential quality issues are worth considering. If you're looking for a simple and functional cup holder, this product could be a good fit. If you need something more versatile or with higher quality assurance, you might want to explore other options.

If you're interested in this product, I recommend checking out customer reviews to get a better understanding of its performance in real-world situations. Additionally, consider if the benefits outweigh the drawbacks for your specific needs and preferences. If you decide to purchase, be prepared for potential minor fit issues and ensure you're buying from a reputable seller to minimize the risk of receiving a low-quality product.

Details:

They will drill themselves into the plastic. Two self taping screws are provided that should accept just about any cell phone on the market including new iPhone 6 plus. There are two available colors: the dark gray or black.

This is a cup holder for the 1st gen body Toyota 4RUNNER from installation: there are two strips of 3m automotive adhesive underneath to aid in attachment. It is for the manual transmission set up only. With the insert removed it can hold a large sports Neogene bottle. The inside width of cell phone slot is 3.

Thread the screws in until they are snug and stop. No drill bits or power tools are needed. You are threading into thin plastic. Just thread the screws into plastic with a handheld Phillips screw driver.

It will hold just about any fast food cup size drink with the insert installed. Do not over tighten. There is also a pen holder and cell phone. Both colors come in a satin flat finish.

There are also 2 screw holes located at the bottom of cell phone tray and on outer edge.

specifications cacuhol:

• for models: 4runner
• for makes: Toyota
• for years: 1984-1989
• brand: Bh3dprinting
• mpn: Bhc-0112
• part type: Holder
• surface finish: Black Or Gray
• country/region of manufacture: United States
• material: Abs Plastic

Ratings:

1. Quick response and fast payment. Perfect! THANKS!! 03-08-18
2. Works great. Thanks 03-10-18
3. Amazing cup holders! Probably the best solution for 80 series Land cruisers! 03-10-18
4. Good buyer, prompt payment, valued customer, highly recommended. 03-07-18
5. Great item, thanks. 03-08-18

Payments cacuhol:

• PayPal

Shipping cacuhol:

• cost: $0.0
• handling: 4 days
• type: Flat

Offer cacuhol:

• bids: 0
• best offer: false
• Sold: 0
• Started: March 12, 2018, 10:24 am
• quantity: 20

Returns cacuhol:

• time: 14 Days
• paid by: Buyer
• policy: returns accepted
• type: Money Back

General cacuhol:

• condition: New
• automotive interior parts accessories > car cup holders
• in stock: Yes

Seller cacuhol:

• city: Forest Falls, California
• zipcode: 92339

Bh3dprinting BHC-0112 Is Similar To:

• Bhc-0106 Bh3dprinting 1996-2002 Toyota 4runner (48.9% similar) Then use a hand held screw driver to thread the screws in. This will not fit on the manual trans console. It is made of abs plastic through the use a 3d printer and comes in two factory colors which are tan oak dark gray. The cup holder will not bond well if console is clean. There is also a pen ...(December 2nd, 2017)
• Bhc-0113 Bh3dprinting 60 Series Toyota (46.3% similar) It comes in a black satin finish. This cup holder is made of abs plastic. This is a double cup holder insert for the 60 series toyota land cruiser. There are also 2 self taping screws provided. It will hold 2 cups, a cell phone, and pens. You can use the adhesive only or and screws depending on how ...(November 2nd, 2017)