BH3DPRINTING BHC-0106 Double Cup Holder 3RD

( Brand: Bh3dprinting ), ( Manufacturer Part Number: BHC-0106 ), ( Part Type: Holder ), ( Surface Finish: Factory Tan And Gray ), ( Country/region Of Manufacture: United States ), ( Oe Spec Or Performance/custom: Performance/custom )

Review BH3DPRINTING Toyota Double Cup Holder 3rd Gen fits 4RUNNER 1996–2002

The Bh3DPrinting BHC-0106 Double Cup Holder is an exceptional addition to your 1996-2002 Toyota 4Runner. Designed specifically for the third generation of this iconic SUV, this cup holder set is meticulously crafted to provide both functionality and style.

Crafted from high-quality ABS plastic, this double cup holder set boasts a durable and sturdy construction. Its design is sleek and modern, seamlessly blending into the interior of your 4Runner while providing a secure hold for your favorite beverage containers.

The Bh3DPrinting BHC-0106 Double Cup Holder is designed to fit perfectly into the center console of your 4Runner, ensuring a snug and secure fit. The set includes two cup holders, each with a generous diameter to accommodate cups of various sizes, from standard soda cans to larger travel mugs.

The Bh3DPrinting Double Cup Holder set is easy to install, requiring no tools or modifications to your vehicle. Simply slide the holders into place and enjoy the convenience of having your drinks within easy reach while on the road.

The Bh3DPrinting BHC-0106 Double Cup Holder set is not only functional but also aesthetically pleasing. Its sleek design adds a touch of modernity to your 4Runner's interior, enhancing its overall look and feel.

In conclusion, the Bh3DPrinting BHC-0106 Double Cup Holder set is an excellent investment for any 1996-2002 Toyota 4Runner owner. Its durability, ease of installation, and stylish design make it an essential accessory for your SUV, providing a convenient and stylish solution for keeping your drinks within easy reach while on the go.

1. Compatibility: The cup holder is specifically designed for 1996-2002 Toyota 4Runner models, ensuring a perfect fit.

2. Durability: Made of high-quality ABS plastic, the cup holder is designed to withstand daily use.

3. Easy installation: No drilling or modifications are required for installation, as it uses the existing cup holder location.

4. Additional storage: The double cup holder design allows for more space for drinks, saving you from having to juggle multiple cups.

1. Limited color options: The cup holder is only available in black, which may not match your vehicle's interior.

2. Potential fit issues: While the cup holder is designed for 1996-2002 Toyota 4Runners, there may be slight variations in vehicle models, which could result in a less than perfect fit.

3. Quality concerns: Some customers have reported issues with the quality of the cup holder, such as the plastic being brittle or the grips not holding drinks firmly.

If you are in need of additional cup holder space for your 1996-2002 Toyota 4Runner and are looking for an easy installation solution, the bh3dprinting double cup holder (BHC-0106) may be a good option for you. However, it's important to keep in mind the limited color options and potential quality concerns. If you're willing to take that risk, you can expect a reliable and functional cup holder that will provide additional storage for your daily needs.

If the bh3dprinting double cup holder (BHC-0106) does not meet your expectations, I would recommend exploring other options from reputable brands that offer more color choices and higher quality materials. Take the time to read customer reviews and compare prices to find the best fit for your needs and budget.

Details:

Then use a hand held screw driver to thread the screws in. This will not fit on the manual trans console.

It is made of abs plastic through the use a 3d printer and comes in two factory colors which are tan oak dark gray. The cup holder will not bond well if console is clean. There is also a pen holder deep which will allow for most larger cell phone on the market with case.

This is the primary method of attachment. This is a double cup holder for the 3rd gen Toyota 4RUNNER. Install instructions there are 3 strips of 3m automotive adhesive already installed. Turn the screw until it is snug and then stop.

Use a small drill bit and pretrial the holes once cup holder has been stuck into place. This single cup holder does allow for almost full movement of the passenger seat front to back. Also, do not over tighten them by hand.

One is underneath the black insert and other on outer corner of bottom edge passenger side. 2 screws are also included to be used in the screw holes. It is available for the automatic 2wd and 4wd. The cell phone slot 3.

Make sure the console is cleaned really well before you attach and use good force when attaching. If you remove the black insert then have a much larger diameter cup holder for items like Neogene bottle. My single cup holder will work on the manual trans. You lose about of forward movement which is very minimal.

I would highly encourage you to use the screws across. The cup holder will hold any fast food and most beverage container sizes.

specifications cacuhol:

• for models: 4runner
• for makes: Toyota
• for years: 1996-2002
• brand: Bh3dprinting
• mpn: Bhc-0106
• part type: Holder
• surface finish: Factory Tan And Gray
• country/region of manufacture: United States
• oe spec or performance/custom: Performance/custom

Payments cacuhol:

• PayPal

Ratings:

1. Great seller!!!! Love these focals!!!!! 12-01-17
2. Great Buyer! Fast Payment! Thank You!! 12-01-17
3. Thank you for your purchase from supplyhut!! Awesome Buyer! 12-01-17
4. Thank you for an easy, pleasant transaction. Excellent buyer.. 12-01-17
5. Great communication. A pleasure to do business with. 12-01-17

Seller cacuhol:

• city: Forest Falls, California
• zipcode: 92339

Offer cacuhol:

• best offer: false
• Started: December 1, 2017, 9:31 pm
• bids: 0
• quantity: 39
• Sold: 0

General cacuhol:

• condition: New
• in stock: Yes
• automotive interior parts accessories > car cup holders

Shipping cacuhol:

• cost: $0.0
• handling: 3 days
• type: Flat

Returns cacuhol:

• policy: returns accepted
• paid by: Buyer
• type: Money Back
• time: 14 Days

Bh3dprinting BHC-0106 Is Similar To:

• Bhc-0113 Bh3dprinting 60 Series Toyota (69% similar) It comes in a black satin finish. This cup holder is made of abs plastic. This is a double cup holder insert for the 60 series toyota land cruiser. There are also 2 self taping screws provided. It will hold 2 cups, a cell phone, and pens. You can use the adhesive only or and screws depending on how ...(November 2nd, 2017)